Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #7058
    Sophia Adams
    Participant

    Has anyone installed the Simplex 49VO-WWA-A strobe in place of the 4906-9206 model? Any tips or things to watch out for during installation?

    • This topic was modified 1 week, 1 day ago by Khris James.
    #7059
    Khris James
    Moderator

    Sure! Installing the Simplex 49VO-WWA-A strobe is relatively straightforward. First, ensure that power to the fire alarm system is turned off to avoid any accidents. Then, remove the existing System Sensor 4906-9206 strobe by disconnecting its wires and unscrewing it from the mounting surface.

    Next, mount the Simplex 49VO-WWA-A strobe in the same location as the old one, using the provided mounting hardware. Make sure to connect the wires to the corresponding terminals on the strobe, ensuring proper polarity to avoid any issues with functionality.

    Once the strobe is securely mounted and wired, you can restore power to the fire alarm system and test the strobe to ensure it activates properly during an alarm event. If everything is working correctly, you’ve successfully installed the Simplex 49VO-WWA-A strobe! If you encounter any difficulties during the installation process, feel free to ask for further assistance.

    • This reply was modified 1 week, 1 day ago by Khris James.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Scroll to Top