Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #8697
    Jason Thompson

    I’m installing a Silent Knight 6700 panel and need some guidance on programming zones. Can anyone provide step-by-step instructions or tips on how to efficiently set up zones on this panel?

    Khris James

    Sure thing! Programming zones on the Silent Knight 6700 is straightforward. Here’s a quick guide:

    Accessing Programming Mode: Enter programming mode by pressing the “Enter” key followed by your password.

    Zone Configuration: Once in programming mode, navigate to the zone configuration section. This typically involves pressing the appropriate keys to access the zone menu.

    Zone Setup: Select the zone you want to program. You can set the zone type (such as fire, supervisory, or burglary), assign a zone number, and configure the zone attributes (such as supervision mode).

    Wiring Details: Ensure that you have wired your devices correctly to the designated zone terminals on the panel. This includes connecting the appropriate end-of-line resistor if required.

    Testing and Verification: After programming, it’s crucial to test each zone to ensure proper functionality. Use a test tool or activate the devices manually to verify that signals are being received by the panel correctly.

    Documentation: Lastly, make sure to document your zone programming for future reference. This includes keeping track of which devices are connected to each zone and any specific configuration settings.

    By following these steps, you should be able to efficiently set up zones on your Silent Knight 6700 panel. If you encounter any specific issues or need further assistance, feel free to ask!

    Hope this helps!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Scroll to Top