- This topic has 1 reply, 2 voices, and was last updated 10 months, 2 weeks ago by
.
-
Posts
-
I’m looking to install a Simplex 4098-9685 in my building. Can anyone provide guidance on the installation process and any tips for ensuring it functions optimally?
To install the Simplex 4098-9685 2-Wire Duct Detector, follow these steps:
Begin by ensuring that power to the system is turned off before starting the installation process.
Mount the duct detector on the ductwork using the provided mounting hardware. Ensure that it is positioned according to the manufacturer’s guidelines, typically near the center of the duct and away from any obstructions.
Connect the wiring according to the wiring diagram provided in the installation manual. Make sure to follow all local electrical codes and regulations.
Once the wiring is connected, secure the connections and ensure that there are no loose or exposed wires.
Power up the system and test the detector to ensure that it is functioning properly. Follow the testing procedures outlined in the installation manual.
After testing, label the detector with its location for easy identification during maintenance and future inspections.
Finally, document the installation process, including any deviations from the standard procedure, for reference purposes.
If you encounter any difficulties during the installation process, refer to the installation manual or contact our technical support team for assistance.
- You must be logged in to reply to this topic.