- This topic has 1 reply, 2 voices, and was last updated 11 months ago by
.
-
Posts
-
Hello Ethan! Sure thing! Installing the Potter CPS-24 is pretty straightforward. First, make sure you’ve got the right tools handy: a screwdriver, wire stripper, and ladder if needed. Start by turning off power to the circuit you’ll be working on. Then, mount the base of the detector to the ceiling or wall using screws. Next, connect the wires to the appropriate terminals on the base—typically, red for positive, black for negative, and yellow for interconnect if you’re linking multiple detectors. Once wired, twist the detector onto the base clockwise until it clicks into place. Finally, restore power and test the detector by pressing the test button. If it sounds off, you’re good to go! Remember to check your local building codes for any specific requirements.
- You must be logged in to reply to this topic.