- This topic has 1 reply, 2 voices, and was last updated 8 months, 4 weeks ago by
.
-
Posts
-
I recently installed a Notifier PSE-10E panel, and I’m experiencing some issues with it. The trouble LED is constantly lit, and I can’t seem to figure out the problem. Any troubleshooting tips?
Hello! When the trouble LED on your Notifier PSE-10E panel is constantly lit, it typically indicates a fault in the system. Here are a few steps you can take to troubleshoot the issue:
Check the Display: First, take a look at the panel’s display. It may provide more specific information about the trouble condition.
Inspect Wiring: Ensure all wiring connections are secure and undamaged. Loose or faulty wiring can often trigger trouble conditions.
Review Documentation: Consult the panel’s manual for a list of possible trouble conditions and their corresponding codes. This can help narrow down the issue.
Reset the Panel: Try resetting the panel to see if that clears the trouble condition. Follow the manufacturer’s instructions for performing a reset.
Contact Support: If the issue persists after troubleshooting, it’s best to contact Notifier technical support or reach out to a certified technician for further assistance.
Remember to always prioritize safety when troubleshooting fire alarm systems. If you’re unsure or uncomfortable with any step, don’t hesitate to seek professional help. Let us know if you have any further questions!
- You must be logged in to reply to this topic.