- This topic has 1 reply, 2 voices, and was last updated 10 months, 2 weeks ago by
.
-
Posts
-
I recently purchased a Notifier PSE-10 for my building’s fire alarm system. Can someone provide guidance on how to properly install it?
Certainly! Here’s a brief guide to installing the Notifier PSE-10:
Choose Location: Select a suitable location for the PSE-10, preferably near the fire alarm control panel (FACP) and within reach of a power source.
Mounting: Ensure the metal enclosure is securely mounted to a stable surface using appropriate hardware. The enclosure should be easily accessible for maintenance but also secure from tampering.
Electrical Connection: Connect the PSE-10 to a dedicated 120 VAC power source. Make sure to adhere to local electrical codes and regulations. The power supply should be wired through a suitable disconnect switch for safety and maintenance purposes.
Wiring: Wire the PSE-10 to the FACP according to the manufacturer’s instructions and wiring diagrams. Ensure proper polarity and secure connections to prevent any electrical issues.
Testing: Once installed, conduct thorough testing of the PSE-10 and the entire fire alarm system to ensure proper functionality. This includes verifying power output, battery charging (if applicable), and communication with the FACP.
Labeling: Properly label the PSE-10 and its associated circuits for easy identification during future maintenance or troubleshooting.
Remember to consult the Notifier PSE-10 installation manual for detailed instructions specific to your model. If you encounter any difficulties during the installation process, feel free to reach out for assistance.
- You must be logged in to reply to this topic.