- This topic has 1 reply, 2 voices, and was last updated 8 months, 2 weeks ago by
.
-
Posts
-
I’m having trouble with my Notifier FZM-1. It seems like it’s not functioning properly. Can anyone offer troubleshooting tips?
Sure, let’s start with some basic troubleshooting steps for your Notifier FZM-1:
Check Power Supply: Ensure that the power supply to the FZM-1 is stable and within the required voltage range.
Inspect Wiring: Verify that all wiring connections to the FZM-1 are secure and free from any damage.
Review Programming: Double-check the programming settings of the FZM-1 to ensure they are configured correctly for your system requirements.
Check Input Devices: Test the input devices (such as smoke detectors or manual pull stations) connected to the FZM-1 to ensure they are functioning properly.
Reset the Device: Try power cycling the FZM-1 by turning it off, waiting a few minutes, and then turning it back on.
If these steps do not resolve the issue, it might be necessary to further diagnose the problem or consult with a certified technician for assistance.”
I hope this helps! Let me know if you have any other questions
- You must be logged in to reply to this topic.