- This topic has 1 reply, 2 voices, and was last updated 1 year, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hello William, thanks for reaching out!Sure thing! To install the Kidde G4SERA-A, start by choosing a suitable location on your wall where it’s easily visible. Make sure it’s not obstructed by any objects. Next, turn off the power to the circuit you’ll be connecting it to. Remove the cover plate and connect the wires according to the instructions provided in the manual. Once the wiring is secure, mount the strobe onto the wall using the provided screws and anchors. Finally, restore power and test the strobe to ensure it’s functioning properly. If you encounter any issues or need further assistance, feel free to ask!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.