- This topic has 1 reply, 2 voices, and was last updated 10 months, 4 weeks ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi Natalie! Sure thing! First, make sure power to the circuit is off before starting. Then, mount the base to the ceiling using screws or anchors if needed. Connect the wires according to the manual—typically black to black, red to red, white to white, and green to ground. Once connected, twist the detector onto the base and test it to ensure proper function. Remember to check local building codes for any specific requirements.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.