[Joshua Rodriguez]

I recently purchased an Edwards G1WA-HDVMA. Could someone guide me through the installation process?

• This topic was modified 8 months, 1 week ago by Khris James.

[Khris James]

Sure! For a smooth installation, start by carefully reviewing the product manual provided (which can also be found in the resources tab here on our site under the product: https://firealarm.com/product/edwards-g1wa-hdvma/?attachment_id=67492&download_file=oph149mfu3el5 ). To install the Edwards G1WA-HDVMA, first, ensure you have the necessary tools: screwdriver, wire strippers, and a ladder if needed. Start by turning off power to the area where you’ll be installing. Remove the existing device if there is one, then mount the new device using the provided screws and anchors. Connect the wires according to the wiring diagram provided in the manual or on the device itself. Once wired, secure the device to the mounting plate, then restore power and test to ensure proper functionality. Finally, label the device appropriately for future reference. If you encounter any issues during installation, refer to the manual or contact Edwards technical support for assistance.

• This reply was modified 11 months, 2 weeks ago by Khris James.
• This reply was modified 11 months, 2 weeks ago by Khris James.
• This reply was modified 11 months, 2 weeks ago by Khris James.
• This reply was modified 8 months, 1 week ago by Khris James.

[Author]

Posts