- This topic has 1 reply, 2 voices, and was last updated 10 months, 2 weeks ago by
.
-
Posts
-
Certainly! The Apollo SA5300-805APO CO Sounder Base is typically installed in conjunction with compatible Apollo detectors. Here’s a brief installation guide:
Ensure power to the area is switched off before beginning installation.
Mount the base securely on the ceiling or wall, ensuring it is positioned in a suitable location for effective CO detection.
Connect the wiring from the CO Sounder Base to the fire alarm control panel according to the manufacturer’s specifications.
Install and activate the compatible Apollo detector on top of the base, ensuring it is securely attached and aligned properly.
Test the functionality of the CO Sounder Base and detector by initiating a test signal from the fire alarm control panel.
Once testing is complete and everything is functioning correctly, restore power to the area.
Remember to refer to the product manual and follow any specific instructions provided by the manufacturer for optimal performance and safety. If you encounter any difficulties during installation, don’t hesitate to reach out for assistance.
- You must be logged in to reply to this topic.