- This topic has 1 reply, 2 voices, and was last updated 10 months, 1 week ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Sure! Installing the Edwards Signaling 3040CT-W Panic Switch is quite straightforward. First, ensure the power to the area is turned off to prevent any accidents. Then, mount the panic switch on a suitable surface, preferably near an exit for easy access during emergencies. Connect the wires according to the provided instructions, typically connecting the common wire to the negative terminal and the normally open wire to the positive terminal. Finally, test the switch to ensure it activates the alarm system properly. If you have any further questions, feel free to ask!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.